CONTROLLING DYNAMIC TORQUE BY OIL PRESSURE The Fuji FET system wrench is equipped with a torque transducer which enables torque control and monitoring on critical applications.
MINIMIZE TIGHTENING TORQUE SCATTER Installed tightening torque tends to scatter for soft joint applications due to relaxation issues. To combat this, the FET system has functionality to add additional pulses after reaching torque target which ensures a more stable output.
FET SERIES SYSTEM
UNIQUE FEATURES OF FET SERIES
FET SERIES SYSTEM
FET SERIES KIT
ACCESSORIES
PULSE WRENCHES NON SHUT-OFF TYPE
FL Series
FEATURES
PULSE WRENCHES NON SHUT-OFF TYPE
Recommended Torque Range, Max Torque Shows recommended torque range or max torque of the model. Torque figures in the specifications must be used as guidance only, as final output depends on type and size of bolts and nuts, joint rate and air pressure etc.
PISTOL AND STRAIGHT MODELS (SQUARE DRIVE - BIT SHANK) Sq. 6.35 mm (1/4") ~ 9.5 mm (3/8") ~ 12.7 mm (1/2")
PULSE WRENCHES NON SHUT-OFF TYPE
PISTOL GRIP & STRAIGHT MODELS (SQUARE DRIVE - BIT SHANK)
PULSE WRENCHES SHUT-OFF TYPE
FLT Series
STANDARD MODELS (SQUARE DRIVE - BIT SHANK) Sq. 9.5 mm (3/8") ~ 19 mm (3/4") - Hex. 6.35 (1/4")
For the low air pressure operation 0.4-0.5 MPa (4-5 bar), low pressure models (-L) are provided with special design optimi-zing oil flow from relief valve. This design enables acurate and consistent tightening.
LOW PRESSURE MODELS
PISTOL GRIP & STRAIGHT MODELS (SQUARE DRIVE - BIT SHANK) Hex. 6.35 mm (1/4") ~ Sq. 9.5 mm (3/8") ~ 19 mm (3/4")
